Remington Security Camera Inc. CAM02420 Benutzerhandbuch
4. Installation
Ensure the power switch on the monitor and camera are set to
the OFF position before proceed following steps.
the OFF position before proceed following steps.
Try to position both the Camera and Monitor as high off the ground as possible for
better picture reception.
N
Camera
(1) Connect the power adapter to the camera power input and ensure the camera is turned
‘ON’ Ensure the camera is set to channel 1
‘ON’ Ensure the camera is set to channel 1
Monitor
(1) Connect the supplied power adapter to the power input of the monitor OR connect the
DC plug from the battery box to the DC input jack at the back of the monitor
(2) Use the channel selection switch button and ensure the monitor is set to the same channel
as the camera to view the picture. Note: If you experience transmissio n reception
problems (eg. poor picture), you may need to select another channel on the camera and
monitor and/or adjust the antennas on the monitor and camera to ensure they are pointing
at each other.
(3) Adjust the volume to the desired level. You may also mute the audio option by pressing
the mute button which is located at the front of the monitor.
DC plug from the battery box to the DC input jack at the back of the monitor
(2) Use the channel selection switch button and ensure the monitor is set to the same channel
as the camera to view the picture. Note: If you experience transmissio n reception
problems (eg. poor picture), you may need to select another channel on the camera and
monitor and/or adjust the antennas on the monitor and camera to ensure they are pointing
at each other.
(3) Adjust the volume to the desired level. You may also mute the audio option by pressing
the mute button which is located at the front of the monitor.
(4) Adjust the brightness and contrast levels as required
MONITOR
CAMERA
DC INPUT Jack
13.5V 1.2 A
AC Adapter
AC Adapter