Remington Security Camera Inc. CAM02420 User Manual

 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Ensure the power switch on the monitor and camera are set to  
      the OFF position before proceed following steps.

 

   

 

   

Try to position both the Camera and Monitor as high off the ground as possible for  

    better picture reception.  

    

    (1) Connect the power adapter to the camera power input and ensure the camera is turned      
          ‘ON’  Ensure the camera is set to channel 1 

    (1) Connect the supplied power adapter to the  power input of the monitor OR connect the   
         DC plug from the battery box to the DC input jack at the back of the monitor 
    (2) Use the channel selection switch button and ensure the monitor is set to the same channel 
         as the camera to view the picture.  Note:  If you experience transmissio n reception  
         problems (eg. poor picture), you may need to select another channel on the camera and  
         monitor and/or adjust the antennas on the monitor and camera to ensure they are pointing  
         at each other. 
    (3) Adjust the volume to the desired level.  You may also mute the audio option by pressing  
         the mute button which is located at the front of the monitor. 

    (4) Adjust the brightness and contrast levels as required 

13.5V 1.2 A
AC Adapter