Xsilogy Inc. 0920HP Benutzerhandbuch
Installation
Overview of Installation Steps
§ Ensure unobstructed egress from the battery area.
§ Neutralize static buildup just before working on a battery by
§ Neutralize static buildup just before working on a battery by
contacting the nearest effectively grounded surface.
Parts Substitution
Do not use substitute parts or perform any unauthorized modification of
equipment. This will void your warranty and may create a hazardous
condition.
equipment. This will void your warranty and may create a hazardous
condition.
Overview of Installation Steps
Installing BattGuard involves the following steps:
1. Install the Telesensor hardware on each battery cell.
(See next section.)
2. Install the End-of-String module and connect to a PC.
3. Install the BattGuard software.
4. Set up the battery strings so BattGuard can monitor them.
Hardware Installation Instructions
All safety precautions listed in this document should be followed during
BattGuard installation. Work performed on batteries should be done only
with proper and safe tools and with the protective equipment listed in
“Tools and Additional Equipment” on page 2-1.
BattGuard installation. Work performed on batteries should be done only
with proper and safe tools and with the protective equipment listed in
“Tools and Additional Equipment” on page 2-1.
Preliminary Release X1
2-3