Netgear 12400219 Benutzerhandbuch

Front and Side Panel

The router front panel has the status LEDs and icons shown in the following figure.

Power

Solid amber. The  router is starting  up.

Blinking amber. The firmware is upgrading, or the Restore Factory Settings button was 

pressed.

Solid green . The  router is  ready.

Blinking green . The  firmware is corrupted. See 

Off. Power is not supplied to the router .

Internet

Solid green . The  Internet connection is ready.

Solid amber. The Ethernet cable connection to the modem has been detected.

Off. No Ethernet cable is connected to the modem.

Wireless

Solid blue . The wireless radio is operating in either 2.4 GHz or 5 GHz mode.

Blinking: The  router is in WPS  mode. 

Off. The wireless radios are of f for both 2.4 GHz and 5 GHz.

USB

Solid blue: The router has accepted the USB device.  The USB device is ready to be used. 

Blinking blue : A USB device is plugged in and is trying to connect. 

Off: No USB device is connected; someone clicked the Safely Remove Hardware button, and 

it is now safe to remove the attached USB device.