Netgear 12400219 Manuel D’Utilisation
Hardware Setup
9
R6250 Smart WiFi Router
Front and Side Panel
The router front panel has the status LEDs and icons shown in the following figure.
LEDs
WiFi On/Off button
WPS button
Figure 2. Router front and side view
Table 1. Front panel LED descriptions
Table 1. Front panel LED descriptions
LED
Description
Power
•
Solid amber. The router is starting up.
•
Blinking amber. The firmware is upgrading, or the Restore Factory Settings button was
pressed.
•
Solid green . The router is ready.
•
Blinking green . The firmware is corrupted. See
•
Off. Power is not supplied to the router .
Internet
•
Solid green . The Internet connection is ready.
•
Solid amber. The Ethernet cable connection to the modem has been detected.
•
Off. No Ethernet cable is connected to the modem.
Wireless
•
Solid blue . The wireless radio is operating in either 2.4 GHz or 5 GHz mode.
•
Blinking: The router is in WPS mode.
•
Off. The wireless radios are of f for both 2.4 GHz and 5 GHz.
USB
•
Solid blue: The router has accepted the USB device. The USB device is ready to be used.
•
Blinking blue : A USB device is plugged in and is trying to connect.
•
Off: No USB device is connected; someone clicked the Safely Remove Hardware button, and
it is now safe to remove the attached USB device.