CipherLab Co. Ltd. 1663 Benutzerhandbuch
14
Enter Setup
1663 Barcode Scanner
User Guide
The example below shows ho w to save your se ttings as “User Default” so that you may
restore user defaults at a later time:
restore user defaults at a later time:
Steps Action
LED/Beeper Response when Successful
1)
Power on the scanner…
The scanner will respond with a long beep
(high tone) and its LED indicator will
become solid red and go off.
(high tone) and its LED indicator will
become solid red and go off.
2)
Enter the Configuration Mode…
The scanner will respond with six beeps
(high-low tone repeats three ti mes), and
its LED indicator will be flashing red.
(high-low tone repeats three ti mes), and
its LED indicator will be flashing red.
3)
Read a Setup barcode…
For example,
The scanner will respond wi th two beeps
(low-high tone) if reading a normal setup
barcode.
(low-high tone) if reading a normal setup
barcode.
4)
Exit the Configuration Mode…
OR
Same as for
Enter the Configuration Mode.
5)
The scanner will automatically restart itself…
Same as for
Power on the scanner.
*
When any configuration error occurs...
The scanner will respond wi th one long
beep (low tone).
beep (low tone).