CipherLab Co. Ltd. 9500CE1 Benutzerhandbuch

100

9500CE Terminal Reference Manual

*“Convert Code 39 to Code 32” must be enabled!

Select Discrete
Length

The length of a barcode refers to the number of
characters (i.e. human readable characters), including
check digit(s) it contains.

Any Length

One Discrete Length

Two Discrete Lengths

Length within Range

For example, if “Length within Range” is selected, the
terminal will only accepts those barcodes with lengths
that fall between the maximum and minimum lengths;
otherwise, data will be rejected.

*If “Code 39 Full ASCII” is enabled, “Length within
Range” or “Any Length” is the preferred option.

Any Length

Verify Check Digit

When enabled, the checksum verification will be
performed in decoding.

If the checksum is incorrect, data will be rejected.

*Only barcodes that include a Modulo 43 check digit
are decoded. Enable this feature if the barcode contains
a Modulo 43 check digit.

NO (Disabled)

Transmit Check Digit When enabled, the check digit will be included in the

data being transmitted.

*By default, this feature (Not Transmit Check Digit)
only works when “Verify Check Digit” is enabled first!

NO (Disabled)

Code 39 Full ASCII

When enabled, Code 39 Full ASCII will be supported
instead. All the alphanumeric and special characters are
included.

NO (Disabled)

Code 93

Supported on 2D Reader

Default

Enable Code 93

YES or NO

NO (Disabled)

Select Discrete
Length

Refer to Code 39 above.

Any Length

Code 11

Supported on 2D Reader

Default

Enable Code 11

YES or NO

NO (Disabled)

Select Discrete
Length

Refer to Code 39 above.

Any Length

Verify Check Digit

When enabled, the checksum verification will be
performed in decoding.

If the checksum is incorrect, data will be rejected.

Disable