CipherLab Co. Ltd. 9500CE1 Benutzerhandbuch

Š

Disable 

Š

One Check Digit 

Š

Two Check Digits 

Transmit Check Digit  When enabled, the check digit will be included in the 

data being transmitted. 

*By default, this feature (Not Transmit Check Digit) 
only works when “Verify Check Digit” is enabled first! 

NO (Disabled) 

YES or NO 

YES (Enabled) 

The length of a barcode refers to the number of 
characters (i.e. human readable characters), including 
check digit(s) it contains. 

The weak structure of some barcodes may cause a 
“short scan” error. To prevent this, select specific 
lengths: one or two discrete lengths 

Š

Any Length 

Š

One Discrete Length 

Š

Two Discrete Lengths 

Š

Length within Range 

For example, if “Length within Range” is selected, the 
terminal will only accepts those barcodes with lengths 
that fall between the maximum and minimum lengths; 
otherwise, data will be rejected. 

Any Length 

When enabled, the checksum verification will be 
performed in decoding, based on the selected 
algorithm.  

If the checksum is incorrect, data will be rejected. 

Š

Disable 

Š

USS Check Digit 

       (USS = Uniform Symbology Specification) 

Š

OPCC Check Digit 

(OPCC = Optical Product Code Council) 

Disable 

Transmit Check Digit  When enabled, the check digit will be included in the 

data being transmitted. 

NO (Disabled) 

When enabled, the Interleaved 25 reading will be 
expanded into EAN-13. It will then be processed 
according to the settings of EAN-13. 

*The barcode must have a leading zero and a valid 
EAN-13 check digit. 

NO (Disabled)