SendFar Technology Co. Ltd. OAP-04003 Benutzerhandbuch
56
B-1-9 Bridging (as shown in Table B-9)
Parameter
Description
Default Value
Bridging Function
Enable or disable bridging
Function
Enable
IP Address
IP Address of the AP when in
Bridging mode. The user can
use a LAN attached (wired or
wireless) computer to configure
the AP through using a web
browser or telnet program on a
LAN attached computer.
192.168.2.1
Subnet Mask
Consists of four sets of digits
that help divide a network into
sub-networks and simplify
routing and data transmission
255.255.255.0
Operation mode
Enable or disable the operation
mode
Enable
Enable
Disable
Disable
MAC Address
MAC address to be considered
in forward/filter policy
00-00-00-00-00-00
Interface
Select Filter(always block the
frames), Forward(always
forward the frames) or
Dynamic(forward the frames if
the MAC address exists) to the
corresponding interface
1.
Filter
2.
Filter
3.
---
4.
---
Table B-9
57
B-1-10 SNMP Community (as shown in Table B-10)
Parameter
Description
Default Value
Validity
Enable or disable the function
of the corresponding community
index
Enable
Access Right
Select the access right
(Deny/Read/Write/Create) for
SNMP Manager
Read
Community
Specify the type of community
(public or private) for SNMP
Manager
Public
Table B-10
B-1-11 SNMP Trap (as shown in Table B-11)
Parameter
Description
Default Value
Index
Enable or disable the activity of
the corresponding community
Enable
Version
Select or disable the SNMP
Version
Version 1: MIB1
Version 2: MIB2
Version1
IP Address
Specify the IP address of the
SNMP Manager for SNMP Trap
Report
192.168.2.100
Community
Specify the type of community
(public or private) for SNMP
Manager
Public
Table B-11