Lee Technology Korea Co. Ltd. LT2005W Benutzerhandbuch

Seite von 7
5. Enter Table Setting Mode 
z  To enter the Table Setting Mode, press the Top Button about 2 seconds. 
And then it will enter the Table Setting Mode. 
 
6. Alert Mode 
z  When the message is received, the vibration works for 15 seconds. If you 
push the button, the vibration will be stopped. 
 
  7. Message Reading 
    1)    If you press the Side Button, “Call” is displayed. 
    2)    The received message will be displayed if you push the Side Button once more. 
 
  8. Erase Message 
z  To delete the message, make the display screen indicating the table 
number. 
z  Then press the Side Button 3 seconds. The corresponding message will be 
erased. 
 
  9. Battery Information and Replacement 
    1)    Watch-Typed Pager is designed to use a single AAA alkaline battery. 
    2)    To replace the battery, do the following. 
            - Slide the locking switch to the unlock position. 
      - Take out the battery over. 
            - Remove the old battery and insert a new AAA battery in the direction shown 
on the battery compartment. 
            - Slide the battery cover back on the pager and slide the battery lock switch to 
the locked position. 
 
 
GuestCall Troubleshooting 
 
Charge light will not come on 
                 
a.  Make sure there is power to the outlet 
b.  Try changing the position of the coasters on the stack. Make sure they are seated 
properly with the numbers facing front. 
c.  Using a damp rag, clean metal contacts on coaster that will not light