Lee Technology Korea Co. Ltd. LT2005W Benutzerhandbuch
d. Check all connections on charger bases. If only one stack of coasters will not light
on the charger,
There is probably a bad connection. Move wires and be sure they are all plugged
into back of black coaster charger.
If you try all this and the coaster charging light will not come on you most likely have
a blown power supply.
No range on coaster pagers
a. Be sure transmitter is not near any large metal objects, fire walls, etc.
b. Be sure antenna is connected properly and not broken.
Coasters are not paging or paging in a manner you did not program
Review Coaster modes and enter the code for the mode you would like. It probably
has changed.
Coasters are not answering the page or acting strange
Make sure the Coaster has a full charge.
Before you call, try some of the following suggestion
*Remember that the capability of your system will be affected by: Foil backed wallboard,
Metal mesh,
wire reinforced glass, metal sheeting, large mirrors, suspended ceilings, lift shafts etc. These
can all
reflect and thereby reduce the signaling capability of the transmitter. A little forethought prior
to
installation, coupled with a few tests, can normally avoid most of these problems.
1.Read through the manual. Answers to most questions can be found there.
A trouble shooting section further assists you in diagnosing the problem.
2. IMPORTANT NOTICE: