Lee Technology Korea Co. Ltd. LTK-25 Benutzerhandbuch
2
3. Sleep Shutdown Active or not
If you want the pagers to automatically go to sleep at a specific time (by “B” above) this light
should be green. If the light is red the shutdown signal will not be sent.
4. Page manager on Blinking Red.
If this light is green the managers’ pager will be paged when any button pressed goes to blinking
red. You must have a numeric manager pager if you want the servers number sent with the page.
5. Page on transitions
If this light is green the server will be paged upon each transition. (i.e. – when each button pressed
turns yellow, red & flashing red the waiter will be paged.) All pages must be cancelled (by pressing the
button again) when the food is picked up.
6. Set “Page Transition Timers” Menu
This controls how long it takes for the transition from green to yellow to red to flashing red takes.
1 is the shortest period of time and 6 is the longest. Default from the factory is #5 (60 seconds)
1=10 seconds, 2=20 seconds, 3=30 seconds, 4=45 seconds, 5=60 seconds, 6=90 seconds
1=10 seconds, 2=20 seconds, 3=30 seconds, 4=45 seconds, 5=60 seconds, 6=90 seconds
7-11. NOT USED AT THIS TIME
12. Simple Page
When the light is green the system will page waiter on first button press only. The light will stay
green for 5 seconds and then turn off with no further action. NOTE: The light on button # 5 should
be red, to make this function work.
Questions, Comments, Concerns? Call NTN at 82-32-678-8605
Help!
I Need Service!
Help is only a phone call away!
Call Customer Care
82-32-678-8605
SYSTEM PROGRAMMING MENU
*All programming should be done from the main terminal if an additional / cancel panel is used.
4. To enter programming mode plug in the Unit while holding the 3X button
5. You will see the numbers 1 – 12 either flashing, solid Red or Solid Green