Zebra Technologies Corporation PAL1X1 Benutzerhandbuch
3
The Receivers are interconnected (daisy-chained) via CAT-5 cabling, which is also used to
provide power to the units from the PAL-650 Hub and Power Distribution System (Figure 3).
provide power to the units from the PAL-650 Hub and Power Distribution System (Figure 3).
Ethernet
RS-232
CAT-5
Figure 3. PAL-650 Hub and Power Distribution System.
Please see the User’s Manual for the PAL-650 Hub and Power Distribution System for
information on how to connect the Hub to a separate computer for 3-D display of tag positions;
and for instructions on how to calibrate the system.
information on how to connect the Hub to a separate computer for 3-D display of tag positions;
and for instructions on how to calibrate the system.
Once the receivers and hub are installed and interconnected, the PAL-650 tags (cf. Figure 4
below) need to be activated. To do so, remove the metal ring (cf. Figure 5) which attaches the
polystyrene protective bottom plate to the tag radome using the special tool provided with the
system. Once disassembled, the tag internal battery will be visible. (The tag battery should last
at least 5 years in regular service.)
below) need to be activated. To do so, remove the metal ring (cf. Figure 5) which attaches the
polystyrene protective bottom plate to the tag radome using the special tool provided with the
system. Once disassembled, the tag internal battery will be visible. (The tag battery should last
at least 5 years in regular service.)
Figure 4. Active PAL-650 Tag.