Airaya Corp GRID-C3 Benutzerhandbuch
Airaya
– Fast and affordable outdoor wireless bridges
Step 3. Setup bridge software configuration for bridge
After verifying that both bridges and their respective test stations can communicate via
Ethernet, you will need to setup and verify bridge configuration so they will be able to
communicate over the radio link. The configuration given here will be a minimal
configuration for test purposes; for more detailed configuration information, please refer
to the product manual.
communicate over the radio link. The configuration given here will be a minimal
configuration for test purposes; for more detailed configuration information, please refer
to the product manual.
NOTE
Factory default administrative User Name and Password are Airaya with an uppercase A
As a security measure, the WirelessGRID http configuration utility and network management systems (NMS) will timeout if left
open with no activity for 3 or more minutes. You will need to re-login to again access the utility.
As a security measure, the WirelessGRID http configuration utility and network management systems (NMS) will timeout if left
open with no activity for 3 or more minutes. You will need to re-login to again access the utility.
1.
On each test station, open an http session by entering the bridge IP address into
the address field of your web browser. The correct format is:
the address field of your web browser. The correct format is:
, or whatever the bridge’s IP address has been set to.
2.
Login using the default Administrator name and password. Each test station
should now be displaying the “Current Settings” screen.
should now be displaying the “Current Settings” screen.
3.
Record the IP address and MAC address of each bridge. You can also enter a
Unique Name under the Admin Setup tab to help in identifying bridges. It is
common to use this field to enter 32-character location identifiers.
Unique Name under the Admin Setup tab to help in identifying bridges. It is
common to use this field to enter 32-character location identifiers.
Bridge
IP Address
MAC Address
Unique Name
A
B
4.
Under WirelessGRID Bridge List, on bridge A, click “Add New,” and enter
bridge B’s MAC address in the “Bridge MAC Address” box, using the
xx:xx:xx:xx:xx:xx format. Click “Add New.”
bridge B’s MAC address in the “Bridge MAC Address” box, using the
xx:xx:xx:xx:xx:xx format. Click “Add New.”
5.
On bridge B, use the same procedure above to add bridge A’s MAC address.
6.
On the “Security” tab, make sure both ACL Authentication and encryption are
disabled.
disabled.
7.
On each bridge, click on the “Reboot” button on either the Network Settings or
Radio Settings tab to enable new WirelessGRID Bridge List settings.
Radio Settings tab to enable new WirelessGRID Bridge List settings.
8.
On each bridge, reopen the http interface and verify that entries were correctly
saved by reviewing the “Current Settings” screen.
saved by reviewing the “Current Settings” screen.
After verifying that both bridges have the proper WirelessGRID Bridge List
settings, go to step 4.
- 54 -