Airaya Corp GRID-C3 Benutzerhandbuch

 

Airaya

 – Fast and affordable outdoor wireless bridges

 

After verifying that both bridges and their respective test stations can communicate via 

Ethernet, and confirming new WirelessGRID bridge list entries were saved, the following 
ping tests should be done. 
 
 
 

   
 
 

After rebooting bridges, the radio link should be 
established within one minute.  If TPC and DFS are 
enabled, this process may take up to two minutes. 

 

 

To verify network connectivity across a 
WirelessGRID link, you should use test 
station A to do the following: 

 
Ping 192.168.1.70 -t to ping bridge A 
 
Ping 192.168.1.71 -t to ping bridge B across 
the wireless radio link 

Ping 192.168.1.72 -t to ping test station B 
across the wireless link 
  
If all ping tests are successful, then you 

have a properly configured WirelessGRID 
link. Go to Step 5. 
 
Troubleshooting tips for pinging across a 
link:  

 
If you do not get a ping across the two end 
points from test station A to test station B; 
 
You may have a power problem  

 

- Verify that each bridge is connected 

to a power source with the proper 
input voltage. 

 
You may have an Ethernet network cable 
problem at one end  

 

- Verify all physical connections.  You 

should have an Ethernet link light on the switch, router, or computer connected to 
each bridge. 

 
 
 

 

- 55 -