AirVast Technology Inc. WN110 Benutzerhandbuch
22
Figure 3.3-2: The Status Tab
Note: The texts before ”PRISM Wireless Settings” in the caption bar of the dialog box is the profile name of
the current connection. Thus, the caption contexts vary according to the connectivity at the given time. Take
the picture above for example; the associated profile is named “Wireless”.
From the window, the general information on the status of currently connected entry is presented.
You may want to click the Rescan button to reinitiate the scanning process and update the status.
Later the result of scanning will be renewed and displayed in the window afterwards. If you wish to
stop the networking connection, click the Disable Radio button to stop scanning. However, if you
are already in the disabled radio mode, you will find the Enable Radio button here instead. Click
Enable Radio to regain the link then.
State
Here displays the MAC Address of the current associated entry, which could be a connected
access point in the Infrastructure mode or computers joining in the Ad-Hoc network.
Current Tx Rate
This feature indicates the transmission rate of the current connection.
Current Channel
Here reveals the current channel operated in the wireless network. Note that the channel number
differs as the radio scans any available channels in the Infrastructure mode.
Throughout (bytes/sec)
This feature indicates the rates of transmitting (Tx) and receiving (Rx) data package of your
WLAN P3 PCMCIA Card within a short period of time; thus, the values vary on a time basis.