AirVast Technology Inc. WN110 Benutzerhandbuch

 

23 

Link  Quality is based on the percentage of successfully transmitted or received  signal of the 

associated access point beacon within a limited period. The higher the percentage, the better the 

link quality. The bar graph beside also provides a visual interpretation of the current link quality. It 

is note that the Link Quality and Signal Strength features only apply to the infrastructure mode. 

They are  inapplicable in the Ad-Hoc  mode  since data will be  transferred from many different 

computers. 

You may learn the received signal strength of the baseband processor of the Beacon signal from 

the Signal Strength bar beside, and it’s also presented in terms of percentage. As the signal gets 

stronger, you will see the signal percentage rate gets higher.  It is noted that the Signal Strength 

and  Link  Quality  features only apply to the  Infrastructure  mode. They are  inapplicable in the 

Ad-Hoc mode since data will be transferred from many different computers. 

Click this tab to save different profiles for different network configurations. When finish changing the 

settings, please click Apply to perform the new configuration at last. 

Note: Choose the  Advanced Configuration command from the right-click menu of PRISM Configuration 

Utility tray icon will launch this tab too.

 

 

Figure 3.3-3: The Configuration Tab 

Enter texts in the  Profile Name  field to identify a new profile. After defining the configurations 

below, click the  Apply button to establish the profile. To switch between any existing profiles,