Zebra Technologies Corporation WMC63000902 Benutzerhandbuch
MeshNetworks
Warning
Use only the MeshNetworks supplied antenna.
Use of another antenna is prohibited and violates FCC regulations.
Figure 12.
Mounting the Antenna Clip
4. Insert the Antenna into the Antenna Clip as shown in Figure 13. The
Antenna Clip must be closed to secure the Antenna.
The Antenna Clip can be opened to remove the Antenna and WMC6300
card when not in use. If the Antenna Clip becomes unusable due to
adhesive failure or damage, additional Antenna Clips are available
through MeshNetworks by ordering Part Number
The Antenna Clip can be opened to remove the Antenna and WMC6300
card when not in use. If the Antenna Clip becomes unusable due to
adhesive failure or damage, additional Antenna Clips are available
through MeshNetworks by ordering Part Number
MEA-AntennaClip.
Note: In some computers the PCMCIA card slot may be located near the
front of the computer, and a longer Antenna cable may be required. If the
supplied Antenna cannot be installed correctly because the cable is too short,
contact MeshNetworks for additional information or order MeshNetworks Part
Number
front of the computer, and a longer Antenna cable may be required. If the
supplied Antenna cannot be installed correctly because the cable is too short,
contact MeshNetworks for additional information or order MeshNetworks Part
Number
MEA-Antenna24.
Warning
Never use the WMC6300 with the Antenna removed from the Clip.
Never use the WMC6300 with the Antenna disconnected from the Card.
Never use the WMC6300 with the display in the closed position.
10