Zebra Technologies Corporation WMC63000902 Benutzerhandbuch

Seite von 27
 
WMC6300 Windows 2000 User’s Guide 
 
Figure 13. 
Insert the Antenna into the Clip 
Connect the Magnetic Antenna Assembly (Optional) 
Complete the following procedure to install the Magnetic Mount Antenna on the 
rooftop of a vehicle.  (The cable length of the Antenna is approximately 12-feet.) 
 
1. 
2. 
3. 
Attach the Magnetic Antenna to the metal rooftop of the vehicle so that 
the antenna is in a vertical orientation.   
Caution: The base of the antenna contains a powerful magnet that 
secures the antenna to the rooftop.  Use care when attaching the antenna 
Route the remaining 12-foot cable, as required to arrive at the Host 
Computer. 
Warning 
FCC regulations require that the antenna’s operational  
position must be greater than 20 cm from the human body.   
Never use the WMC6300 with the Antenna removed from the rooftop. 
Never use the WMC6300 with the Antenna disconnected from the Card. 
 
Insert the Antenna Cable Connector into the WMC6300 antenna port as 
shown in Figure 14.  
Note:  The connector will “snap” into place when 
fully inserted. 
 
Figure 14. 
Attach Magnetic Mount Antenna to the WMC6300 
11