Extreme networks OAP36C Benutzerhandbuch

Installation

WS-AP3660 Power Supply Installation Procedures

2-14

2.

Feed the supplied stainless steel tie back straps through the openings in the mounting bracket 
(see 

3.

Feed the free end of the strap around the pole.

4.

Tighten the tensioning screw to adapt the strap to the diameter of the pole. 

To connect the power supply to the WS-AP3660:

1.

Locate the DC to DC cable (provided with the power supply).

2.

Insert one end of the DC to DC cable into the DC connector port on the WS-AP3660 (see 

 on page 1-3 for the location of the DC connector).

3.

Screw on and hand tighten the knurled knob securely.

4.

Insert one end of the DC to DC cable into the DC connector on the bottom of the WS-AP3660 
Power Supply (see 

Vertical bracket on vertical pole

Horizontal bracket on horizontal pole

Horizontal bracket on vertical pole

Note: The maximum distance between the WS-AP3660 and Power Supply is 1 meter (see