Ruby Tech OW1000A Benutzerhandbuch

20 

Refer to Figure 3-2 for the following setup. 
Note: The OW-1000A AP is the Central Wireless Bridge and OW-1000A 
CB is the Wireless Client Bridge
Step 1 Set the OW-1000A AP to perform a bridge (bridge IP address: 
192.168.1.1).

Step 2 Set Wireless parameters on the AP to: Channel (1) and SSID 
(wireless) 

Step 3 Set the OW-1000A CB to function in the bridge mode (bridge IP 

address: 192.168.1.241). 

Step 4 Set Wireless parameters on the OW-1000A CB to: Channel (1)

and SSID (wireless), and these parameters must be the same with 

COU. 

Step 5 Left side subnet is transparent to the right side. 

Step 6 DHCP server assign IP address to PC1 and PC2