Справочник Пользователя для Ruby Tech OW1000A
20
Wireless Client Bridge-to-Central Wireless Bridge
3.1
Wireless Client Bridge-to-Central Wireless Bridge
Figure 3-2
Refer to Figure 3-2 for the following setup.
Note: The OW-1000A AP is the Central Wireless Bridge and OW-1000A
CB is the Wireless Client Bridge
Step 1 Set the OW-1000A AP to perform a bridge (bridge IP address:
192.168.1.1).
Note: The OW-1000A AP is the Central Wireless Bridge and OW-1000A
CB is the Wireless Client Bridge
Step 1 Set the OW-1000A AP to perform a bridge (bridge IP address:
192.168.1.1).
Step 2 Set Wireless parameters on the AP to: Channel (1) and SSID
(wireless)
(wireless)
Step 3 Set the OW-1000A CB to function in the bridge mode (bridge IP
address: 192.168.1.241).
Step 4 Set Wireless parameters on the OW-1000A CB to: Channel (1)
and SSID (wireless), and these parameters must be the same with
COU.
Step 5 Left side subnet is transparent to the right side.
Step 6 DHCP server assign IP address to PC1 and PC2