Cisco Systems 102053 Benutzerhandbuch
C I S C O C O N F I D E N T I A L - D r a f t 2
7-3
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-03
Chapter 7 2.4-GHz Radio Upgrade
Opening the Access Cover
Opening the Access Cover
To open the 2.4-GHz radio access cover, follow these steps:
Step 1
Remove all cables and power connections from the access point.
Step 2
Remove all static-generating items from the work area, such as plastic material, styrofoam cups, and
other similar items.
other similar items.
Step 3
Place the access point and the new 2.4-GHz radio (in its antistatic bag) on an antistatic work surface.
Step 4
Discharge any static buildup on your body by touching a grounded surface (antistatic work surface)
before proceeding.
before proceeding.
Step 5
Position the access point so that the bottom cover is facing up.
Caution
The internal access point components and the 2.4-GHz radio can be damaged by ESD from improper
handling.
handling.
Step 6
Remove the bottom access cover using the T-10 tamper-resistant Torx L-wrench provided with your
Cisco radio card (see
Cisco radio card (see
Figure 7-1
Location of 2.4-GHz Radio Access Cover Screw
If your access point was not configured with a 2.4-GHz radio, go to the
section. If you are replacing an existing 2.4-GHz radio, go to the
section.
1
Access Cover Screw
1
74458