Socket Mobile BTM-2 Benutzerhandbuch
KwikBlue Module Development Kit
Installation Guide
7.
HCI Test Setup
The following tests are set up for KwikBlue Modules to be used in an HCI configuration. In this
configuration, the Bluetooth stack drivers are run on a Windows CE device. The KwikBlue Module Dev
Kit provides support for Pocket PC 2000/2002/2003, HPC 2000 and CE .NET devices (CE .NET devices
are custom builds and may require factory support. Please contact Socket regarding these platforms). The
following processors are supported: ARM, ARMV4, ARMV4T, ARMV4i, MIPS and SH3.
configuration, the Bluetooth stack drivers are run on a Windows CE device. The KwikBlue Module Dev
Kit provides support for Pocket PC 2000/2002/2003, HPC 2000 and CE .NET devices (CE .NET devices
are custom builds and may require factory support. Please contact Socket regarding these platforms). The
following processors are supported: ARM, ARMV4, ARMV4T, ARMV4i, MIPS and SH3.
7.1.
Test 1 - Devices with Compact Flash or PC Card Slots
This test connects the CF Ruggedized Serial I/O (CF RIO) card with the KwikBlue Module Dev
Board and runs the Bluetooth drivers on a Windows CE device.
Board and runs the Bluetooth drivers on a Windows CE device.
a) Bluetooth SDK Install: run Setup.exe from the Bluetooth_Stack_Dev_Tools_CR4.3.38 CD. This
will install the Bluetooth SDK files to your desktop in the folder 'C:\Drakar Stack Dev Files'. This
includes the WinCE Bluetooth stack and sample applications.
includes the WinCE Bluetooth stack and sample applications.
b) Bluetooth Driver Install: the Bluetooth driver is contained in a *.cab and can be copied to your
device via ActiveSync or through a storage card.
i) ActiveSync: once your device is ActiveSync'd to your desktop, run Setup.exe from:
C:\Drakar Stack Dev Files\Installs\Main Stack Release\Disk1\Setup.exe
Follow the on-screen instructions to install the Bluetooth drivers to your device.
ii) Storage Card: if your device does not support ActiveSync, you can manually copy the
Bluetooth *.cab to a storage card and install it to your device. The Bluetooth *.cab is
contained in the folder:
contained in the folder:
C:\Drakar Stack Dev Files\Installs\Main Stack Release\CABs
The *.cab name is in the form "BtStack.PlatformProcessor.Cab":
BtStack.CENETARMV4.CAB
(CENET, ARMV4 processor, wide (HPC) screen layout)
BtStack.CENETPPCARMV4.CAB (CENET,
ARMV4
processor, Pocket PC screen layout)
BtStack.CENETPPCARMV4T.CAB (CENET, ARMV4T processor, Pocket PC screen layout)
BtStack.HPC2000ARM.CAB
BtStack.HPC2000MIPS.CAB
BtStack.PPC2003ARMV4.CAB
BtStack.PPCARM.CAB
BtStack.PPCMIPS.CAB
BtStack.PPCSH3.CAB
BtStack.HPC2000ARM.CAB
BtStack.HPC2000MIPS.CAB
BtStack.PPC2003ARMV4.CAB
BtStack.PPCARM.CAB
BtStack.PPCMIPS.CAB
BtStack.PPCSH3.CAB
Once you have copied the *.cab to your device, click on the *.cab to install the drivers.
c) Serial Card Setup: to configure the CF RIO card for use with the KwikBlue module and drivers,
a serial card configuration utility must be run. The KwikBlue Serial Card Wizard is installed from
a *.cab. The *.cab must be copied to your device either through ActiveSync or a storage card.
The *.cab is located on the KwikBlue Dev Kit 008D CD under the folder “\KwikBlue Serial Card
Wizard” directory. Copy the *.cab that matches your OS and processor to your device and click
to install.
a *.cab. The *.cab must be copied to your device either through ActiveSync or a storage card.
The *.cab is located on the KwikBlue Dev Kit 008D CD under the folder “\KwikBlue Serial Card
Wizard” directory. Copy the *.cab that matches your OS and processor to your device and click
to install.
April 23, 2004
Copyright © 2003-2004 Socket Communications, Inc.
Page 12
Document#: 6410-00215-C
CONFIDENTIAL
Revision 1.04