Socket Mobile BTM-2 Benutzerhandbuch

 

The CSR software provides some utilities such as BlueTest.exe (see Desktop Test Set-up) which can be 
used in certification testing. At the time of this release, there are not CSR utilities that can be run under 
Windows CE, CE .NET or Windows Mobile for certification testing. Check the CSR website for the latest 
information http://www.csr.com/home.htm.  

If it is desired to use BlueTest.exe on the desktop, a WinCE utility is needed to pass data between 
BlueTest.exe and the module. When running this WinCE utility, the Bluetooth drivers must be disabled so 
the utility can communicate directly with the KwikBlue Module. The utility opens two COM ports; the 
first COM port is to the module, the second COM port is to the incoming connection from BlueTest.exe 
on the desktop side. Once this bi-directional communication has been established, BlueTest.exe can be 
used for certification testing. 

Pin 1 to 2 

Install only for BC02 module 

Pin 3 to 4 

Install only for BC01 module 

Pin 5 to 6 

Install to light LED when power is on 

Pin 6 to 8 

Install to connect LED to PIO_1 

Pin 7 to 8 

Install to connect RS232 signal RI to PIO_1 

Pin 9 to 10 

Install to connect INVALID# RS232 to PIO_1 

Factory default jumpers