Socket Mobile BTM-2 Benutzerhandbuch
KwikBlue Module Development Kit
Installation Guide
12.
Audio CODEC Setup (Optional)
Figure 8: Optional Audio CODEC Board Setup
Setting up the CODEC board:
Using 10-pin ribbon cable, connect CODEC JP1 to KwikBlue Development Board connector
JP1.
JP1.
Connect headphone/microphone to CODEC connector J9.
Connect 5 VDC power supply to KwikBlue development board connector J4
April 23, 2004
Copyright © 2003-2004 Socket Communications, Inc.
Page 19
Document#: 6410-00215-C
CONFIDENTIAL
Revision 1.04