3M Traffic Safety Systems 6204 Benutzerhandbuch
1 2 3 4 5 6
7
7
7
7
8 9
Reader Configuration Tool
Reader Configuration Tool
Reader Configuration Tool
Reader Configuration Tool
52
52
52
52
3M Toll RFID Reader 6204
3M Toll RFID Reader 6204
3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 User’s Guide
User’s Guide
User’s Guide
User’s Guide
General Settings
allow you to specify the host and domain name of the
reader. The Command and Event Ports are also shown. You can also select
your domain name in this window.
your domain name in this window.
IPv4/IPv6 Settings
allow you to configure the reader’s IP address. If the
reader is to automatically acquire its IP address, subnet mask and default
gateway from a DHCP server, select
gateway from a DHCP server, select
Enable DHCP
. To manually specify this
information, deselect
Enable DHCP
and fill in the desired IP address,
subnet mask and default gateway.
Other Settings
allow you to configure the NTP servers the reader can
contact to obtain the current time, DNS servers the reader can contact for
domain name resolution, and the Domain list to resolve names to IP
addresses.
domain name resolution, and the Domain list to resolve names to IP
addresses.
Enter all the required information and press
Submit
.
7.1.5.
Setup Serial Port
Setup Serial Port
Setup Serial Port
Setup Serial Port
The Setup Serial Port function allows you to configure the serial port
parameters. These parameters include:
parameters. These parameters include:
Baud rate
Data bits
Parity
Echo
Stop bits
Use the pull-down menus to select a value and press
Submit
to update the
reader.