3M Traffic Safety Systems 6204 Benutzerhandbuch
1 2 3 4 5 6
7
7
7
7
8 9
Reader Configuration Tool
Reader Configuration Tool
Reader Configuration Tool
Reader Configuration Tool
54
54
54
54
3M Toll RFID Reader 6204
3M Toll RFID Reader 6204
3M Toll RFID Reader 6204
3M Toll RFID Reader 6204 User’s Guide
User’s Guide
User’s Guide
User’s Guide
7.1.7.
Setup Antenna/Cables
Setup Antenna/Cables
Setup Antenna/Cables
Setup Antenna/Cables
This page allows you to configure the reader’s antenna multiplexer
sequence as well as conducted power. For detailed descriptions of each of
the antenna and cable variables, refer to Antenna Configuration in Chapter
4 – Reader Behavior of the 3M Toll RFID Reader
sequence as well as conducted power. For detailed descriptions of each of
the antenna and cable variables, refer to Antenna Configuration in Chapter
4 – Reader Behavior of the 3M Toll RFID Reader
3M Toll RFID Reader
3M Toll RFID Reader
3M Toll RFID Reader 6204 P
6204 P
6204 P
6204 Protocol Reference
rotocol Reference
rotocol Reference
rotocol Reference
Guide
Guide
Guide
Guide.
To configure an antenna, enter the antenna number in the
Mux Sequence
field. The individual antenna
Conducted Power
fields will be activated in
the lower window. The current values will be displayed. Only those antennas
listed in the
Mux Sequence
will be shown. Also, you must set
Conducted
Power
to
0
in order to set or change the
Attenuation
,
Cable Loss
, or
Gain
.
To change, enter the appropriate values for each antenna parameter and
press the
press the
Submit
button to update the antenna and cable configuration.
Select the next antenna and repeat.