3M Traffic Safety Systems 6204 Benutzerhandbuch

1 2 3 4 5 6

8 9

Reader Configuration Tool

3M Toll RFID Reader 6204

3M Toll RFID Reader 6204 User’s Guide

User’s Guide

ADDITIONAL ANTENNA NOTES:

The required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for
successful communication.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it
does not emit an RF field in excess of Health Canada limits for the general population; consult Safety
Code 6, obtainable from Health Canada’s website at:
http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct/index-eng.php.

Additional details for the approved antennas for the 3M Toll RFID Reader 6204 can be found in
Section 9.1.7., 3M

Section 9.1.7., 3M

Section 9.1.7., 3M Toll

Toll

Toll RFID Reader 6204 Antenna Specifications

RFID Reader 6204 Antenna Specifications

RFID Reader 6204 Antenna Specifications.

7.1.8.

Set Regulatory Mode (Region)

This page allows the user to configure the reader to meet the regulatory
requirements for the geographic region where the reader is deployed. The
sub-region sets the secondary regulatory mode for the geographic region
where the reader is deployed.

For detailed information on each of these parameters, refer to the 3M Toll

3M Toll

RFID Reader

RFID Reader 6204 P

6204 P

6204 Protocol Reference Guide

rotocol Reference Guide

rotocol Reference Guide. Descriptions are provided in

the

setup.region

and

setup.sub_region

configuration variable

sections.

7.1.9.

Setup Summary

This page allows you to quickly setup the basic operational parameters of
the reader.