Kenwo Industries Limited ARI60 Benutzerhandbuch
NOTE:
Press button 3 to exit without
changing the setting or saving
4. Press button
1 to select
icon and to
begin
programming
1. Press button 4 twice to
enter programming
mode
1. Press Button 2 to
scroll between the
alert options
Alert options include: alert off, vibrate,
audible, vibrate and audible
3. Press button 4
repeatedly to
repeatedly to
scroll though the
programmable
icons
Programming Instruction
s
There are two types of programming mode:
1) Programming the Transceiver- To program the transceiver the MCM does not have to
1) Programming the Transceiver- To program the transceiver the MCM does not have to
be installed or be within range. The programmable modes for the Transceiver are:
•
Transceiver Alert Type (Audible/Silent Vibrate).
•
Alarm Clock.
•
Clock.
2) Programming the MCM- To program the MCM the system must be installed, with in
range, and in the disarmed mode. The programmable modes for the MCM are:
•
Auto/Manual Arming.
•
Siren Tones and Siren Duration.
•
Adjusting ADL202 Accelerometer (impact/shock sensor).
Entering Programming Mode
Follow the steps below to enter the programming mode:
Selecting Transceiver Alert Type (Audible/Silent Vibrate)
1. Enter programming mode. The icon will begin to flash, press button #1 to
select. The LCD will display the current settings. To program follow these steps:
9
Operating Instructions
The following instruction assumes that the transceiver is with in range of the motorcycle.
Arm
1. Press button #1, siren chirps 3 times and the turn signal lights flash 1 time.
2. The Transceiver echoes 3 chirps and the LCD displays
and
and
PERIMT
OFF
icons.
Disarm
1. Press button #2, siren chirps 1 time and lights flash 1 time.
2. The Transceiver echoes 1 chirp and the LCD displays
2. The Transceiver echoes 1 chirp and the LCD displays
icon.
Arming With Optional Perimeter Sensor
1. Press button #3, siren chirps 4 times and turn signal lights flash 1 time.
2. The Transceiver echoes 4 chirps and the LCD displays
,
icons.
3. The system is armed but the Perimeter Sensor is disabled.
Arming Without Siren / Paging Only
1. Press buttons #1 and #3 at the same time, siren chirps 5 times and the turn
signal lights flash 1 time.
2. The Transceiver echoes 5 chirps and the LCD displays
,
and
icons.
3. The system is armed but the siren and turn signal lights are disabled for a silent
paging only alert.
Arming Without Siren or Perimeter Sensor (optional) / Paging Only
1. Press buttons #2 and #3 at the same time, siren chirps 6 times and the turn
signal lights flash 1 time.
2. The Transceiver echoes 6 chirps and the LCD displays
, ,
and
PERIMT
OFF
icons.
3. The system is armed but the siren, turn signal lights and perimeter sensor are
disabled.
Panic/ Stop Trigger
1. When system is armed press button #3 for Panic feature. (panic feature will
sound siren for a few seconds, drawing attention to your bike)
2. Pressing button #3 during an alarm trigger stops the alarm cycle but keeps
the system armed.
sound siren for a few seconds, drawing attention to your bike)
2. Pressing button #3 during an alarm trigger stops the alarm cycle but keeps
the system armed.
6
2. Available programmable
options will be displayed.
The selected icon will flash
Note. At any time during programming press button # 3 to exit without saving and return to the
main screen
2. Press button
4 to save and
exit