CyberTAN Technology Inc. WA310A Benutzerhandbuch

 

 

 
 

 
 
 

Wireless Mode: lets you select the 
network scenarios, either Ad-Hoc or 
Infrastructure. Default setting is 
“Infrastructure” 
SSID: lets you set the Service Set 
Identifications: 
Default SSID is “Any”. When set to 
any, the adapter is allowed access to 
any nearby AP. 
Channel: enables you to select a 
transmission channel. 
Transmission Rate: displays a list 
of transfer rates. 
AP density: enables you to set the 
relative number of access points 
near the WS300. Use this setting to 
reduce channel overlap and 
interference: 

•  Low: 1-2 nearby APs   
•  Medium: 3-4 nearby APs   
•  High: 5 or more nearby APs   

When connected in an infrastructure 
or ad-hoc mode, a list of nearby APs 
or peers is displayed at the bottom of 
the Info screen. When you re-load 
the web page, the list will be 
updated. 
 
WEP enabled: Allows you to enable 
or disable Wired Equivalency Privacy 
(WEP) for encryption, with either 64- 
or 128-bit encryption. 
WEP key length: Enables you to 
choose either a 64- or 128-bit 
encryption scheme.    Be sure that 
the adapter’s WEP key must be the 
same as the AP’s, otherwise adapter 
still can not communicate with 
wireless LAN.