CyberTAN Technology Inc. WA310A Benutzerhandbuch
11Mbps Wireless Ethernet Adapter User's Manual
23
The Server Tab
IP Address Mode: Select “Static” or
“DHCP” mode. For “Static” mode,
the IP address settings are given by
user. For “DHCP” mode, IP settings
will be overridden by a DHCP server
on your network. The default setting
is “Static”
IP Address: The static IP address
you may assign to the adapter. The
default value is “192.168.1.200”.
Subnet Mask: The subnet mask you
want to assign for the adapter. The
default value is “255.255.255.0”.
Gateway: The gateway you want to
assign for the adapter. The default
value is “192.168.1.1”.
Device Name: optional device name
setting
Allow upgrade : Check the box, and
then it is allowed to upgrade
firmware.
Cloning Bridge
“DHCP” mode. For “Static” mode,
the IP address settings are given by
user. For “DHCP” mode, IP settings
will be overridden by a DHCP server
on your network. The default setting
is “Static”
IP Address: The static IP address
you may assign to the adapter. The
default value is “192.168.1.200”.
Subnet Mask: The subnet mask you
want to assign for the adapter. The
default value is “255.255.255.0”.
Gateway: The gateway you want to
assign for the adapter. The default
value is “192.168.1.1”.
Device Name: optional device name
setting
Allow upgrade : Check the box, and
then it is allowed to upgrade
firmware.
Cloning Bridge
Note!
You may need to reboot the adapter, and then re-load the page to see
any new settings.
any new settings.
The Stations Tab
The bridge table: display the stations
IP address and Mac address
IP address and Mac address