Honeywell International Inc. 7850LPE Benutzerhandbuch
7 - 8
2. Select the radio or radio combination in the list and tap Apply. The Radio Manager attempts to enable the radio.
3. When the radio is enabled, the Status field reads “Success.”
Note: If an error occurs during a radio mode change, an error message appears in the Status field and the change is abandoned;
Radio Manager Window
To Disable a Radio
To power down all radios, select None and tap Apply. All radios are disabled.
Field
Description
Radio Modes
Displays the radio hardware modules currently installed on the terminal.
Status Field
Provides feedback on the state of the radio. The Status field reads “Ready” when the selected
radio is enabled and the Radio Manager is ready to receive a command.
Otherwise, the Status field displays the following messages when enabling a radio:
•
radio is enabled and the Radio Manager is ready to receive a command.
Otherwise, the Status field displays the following messages when enabling a radio:
•
Success=The radio or radio combination has been successfully enabled.
•
802.11b Driver Timeout
•
802.11b Driver Refused Mode Change Request
•
802.11b Driver Not Installed