Honeywell International Inc. 85606065 Benutzerhandbuch
3 - 3
Connectors
USB Host Port
The USB Host port features a 5V DC power pass-through and can host supported USB client devices. Multiple USB
devices can be accommodated by plugging a USB HUB into the USB Host port. This is a four-pin connector and
supports USB 1.1 communication. USB 2.0 devices that are backwards compatible with USB 1.1 may be connected
to this port but will operate at USB 1.1 speeds.
devices can be accommodated by plugging a USB HUB into the USB Host port. This is a four-pin connector and
supports USB 1.1 communication. USB 2.0 devices that are backwards compatible with USB 1.1 may be connected
to this port but will operate at USB 1.1 speeds.
DB15 Connector
This is a single 15-pin, D-style, high-density female connector. All power cables have a connector that matches this
pin configuration. This connector powers the device (by receiving power from the cable) and communicates with a
host workstation using ActiveSync (USB only).
pin configuration. This connector powers the device (by receiving power from the cable) and communicates with a
host workstation using ActiveSync (USB only).
RJ45 Jack
IK8560E—On the IK8560E unit, this is a 10/100 Base-T communications port that supports wired ethernet
communications with a standard RJ45 ethernet cable. Cable must be purchased separately. You cannot power the
device through the ethernet cable. For more information, see
communications with a standard RJ45 ethernet cable. Cable must be purchased separately. You cannot power the
device through the ethernet cable. For more information, see
IK8560C—On the IK8560C unit, this connector is not enabled.