Adtran TRC6320 Benutzerhandbuch
Section 5 User Interface Guide
TRACER 6000 Series Split System Manual
70
612806320L1-1A
displays. Press <Enter> again to make the channel combination change. If the specified channel selection
is not valid, the TRACER automatically corrects the configuration and populates the field with a valid
selection.
is not valid, the TRACER automatically corrects the configuration and populates the field with a valid
selection.
> 4
X
E1 M
ODULE
C
ONFIGURATION
/S
TATUS
/H
ISTORY
(M
AIN
S
CREEN
)
Figure 12 shows the TRACER E1 module Configuration main screen, which contains access to the status,
configuration, testing, and performance history parameters for the selected E1 module.
configuration, testing, and performance history parameters for the selected E1 module.
Figure 12. E1 Module Configuration/Status/History (Main Screen)
> E1
X
S
TATUS
/C
ONFIGURATION
/L
OOPBACK
Figure 13 on page 71 shows the E1x Status/Configuration/Loopback menu page, which displays a
real-time graphical representation for the E1x link using data from both the local and remote TRACER
units. E1x operational configuration parameters and testing functions are configured from this menu.
real-time graphical representation for the E1x link using data from both the local and remote TRACER
units. E1x operational configuration parameters and testing functions are configured from this menu.
The number of active channels and the channel configuration on both the local and remote
systems must match for the RF link to function properly. A discrepancy between the systems
can result in unpredictable operation.
systems must match for the RF link to function properly. A discrepancy between the systems
can result in unpredictable operation.
The following menus for the E1x Status/Configuration/Loopback apply to all four
available E1 interfaces (A through D).
available E1 interfaces (A through D).