Binsfeld Engineering Inc TX10K-LP Benutzerhandbuch
- 38 -
Appendix C: Error Codes
Error Displayed
Error Detected
Tx Signal UnderRange
The input signal to the TX10K is
less than the minimum level
less than the minimum level
Tx Signal OverRange
The input signal to the TX10K is
greater than the maximum level
greater than the maximum level
Rx Signal UnderRange
The output signal of the RX10K is
less than the minimum level
less than the minimum level
Rx Signal OverRange
The output signal of the RX10K is
greater than the maximum level
greater than the maximum level
Tx->Rx Data Error
The signal from the TX10K is not
being received properly by the
RX10K
being received properly by the
RX10K
NOTE: The output signals of the
RX10K will go to negative full
scale (-12000mV)
RX10K will go to negative full
scale (-12000mV)
Tx Power Low Error
The power supply voltage level of
the TX10K is to low
the TX10K is to low
Tx Power High Error
The power supply voltage level of
the TX10K
the TX10K
Rx Power Low Error
The power supply voltage level of
the RX10K is too low
the RX10K is too low
Rx Power High Error
The power supply voltage level of
the RX10K is too high
the RX10K is too high