Zebra Technologies Corporation P100I Benutzerhandbuch
980590-001 Rev. A Draft 1
P100i User’s Manual
37
5
Cleaning
Cleaning System
Your P100i Printer includes a simple cleaning system using Pre-Saturated Cleaning Cards
provided. The regular use of these cards will clean and maintain important parts of your
printer that cannot be reached: including Print Head, the Transport Rollers, and the
Magnetic Encoder Station (optional feature).
provided. The regular use of these cards will clean and maintain important parts of your
printer that cannot be reached: including Print Head, the Transport Rollers, and the
Magnetic Encoder Station (optional feature).
When to Clean
After approximately 1000 color cards have been printed, the printer LCD will prompt
CLEAN PRINTER, or when print quality has been degraded.
CLEAN PRINTER, or when print quality has been degraded.
How to Clean
1.
Leave power on.
2.
Press and hold the Multi-Function Control Button for 5 seconds.
3.
When the cleaning cycle is initiated, the LCD message REMOVE RIBBON THEN
CLOSE LID will display.
CLOSE LID will display.
N
Caution •
PROTECT YOUR FACTORY WARRANTY!
The recommended maintenance procedures must be performed to maintain your
factory warranty. Other than the recommended cleaning procedures described in this
manual, allow only Zebra authorized technicians to service the P100i Printer.
factory warranty. Other than the recommended cleaning procedures described in this
manual, allow only Zebra authorized technicians to service the P100i Printer.
NEVER
loosen, tighten, adjust, or bend, etc., a part or cable inside the printer.
NEVER
use a high-pressure air compressor to remove particles in the printer.