Zebra Technologies Corporation P100I Benutzerhandbuch
Cleaning
Cleaning the Print Head
980590-001 Rev. A Draft 1
P100i User’s Manual
39
Cleaning the Print Head
Use of the cleaning cards will normally do an adequate job of cleaning the printer. However, a
separate Print head cleaning, using swabs, can remove more stubborn deposits when print
anomalies persist. To avoid deposits, only use foam-tipped swabs.
separate Print head cleaning, using swabs, can remove more stubborn deposits when print
anomalies persist. To avoid deposits, only use foam-tipped swabs.
1.
Place the printer power switch in the OFF (0) position.
2.
Open printer lid by pressing cover release button and open cover fully to reveal the print
head mounted to inside of the cover.
head mounted to inside of the cover.
3.
Clean Print Head by moving alcohol-moistened swab tip side-to-side across Print Head
elements. Only use moderate force.
elements. Only use moderate force.
4.
Allow two to three minutes for the printhead to dry before placing the printer power
switch in the ON ( | ) position.
switch in the ON ( | ) position.
5.
To reorder swabs, reference the P110i Printer Media List.
Caution • Never use a sharp object to scrape deposits from the print head. Permanent
damage to the print head will result
damage to the print head will result