Zebra Technologies Corporation MD-QL3021 Benutzerhandbuch
12
QL 420 User’s Guide
continued on next page
2. Load the media:
Loading media from an internal supply. Refer to Figure 6.
Loading media from an internal supply. Refer to Figure 6.
• Pull the media supports apart, insert the roll of media be-
tween them, and let the media supports close. Ensure
that the media pulls off the core in the direction shown in
Figure 6. The supports will adjust themselves to the width
of the media, and the media should be able to spin freely
on the supports.
that the media pulls off the core in the direction shown in
Figure 6. The supports will adjust themselves to the width
of the media, and the media should be able to spin freely
on the supports.
Media Roll
Note direction
media pulls off the
roll.
media pulls off the
roll.
Pull Media Supports
apart.
apart.
F
IGURE
6: I
NSTALLING
M
EDIA
IN
THE
QL 420