Zebra Technologies Corporation MD-QL3021 Benutzerhandbuch

14

QL 420 User’s Guide

3. Close the Media Cover Refer to Figure 8.

• If you plan to use the printer in the tear-off mode, close the

media cover as shown at “2”, then rotate the latch assem-
bly as shown until it locks into place, as shown at “4”.

• If you plan to use the printer in the peel-off mode, peel a

few labels off of the media and pull it out of the printer as
shown at “1”. Close the media cover as shown at “2”.  Ro-
tate the “EZ-Peel” peeler bar until it locks into place on the
latch, as shown at “3”, then rotate the Latch as shown until
it locks into place, as shown at “4”.

• Turn on the printer or press the Feed button if the printer

is already on.
The printer will advance the media to the next label, if
printing labels.  If you are printing on journal media, the
printer will advance a short strip of media and will then be
ready for printing.

Media Cover

“EZ-Peel” Peeler Bar

Latch Assembly

Pull Media  out  of
Printer

F

IGURE

 8: C

LOSING

 

THE

 QL 420