Zebra Technologies Corporation RFID-M2HF Benutzerhandbuch

Specifications
Ribbon Specifications

13383L-002 Rev. A

XiIIIPlus/R110Xi/R170Xi User Guide

12/2/05

Refer to the following tables for ribbon specifications.

110XiIIIPlus and R110Xi

Match the ribbon to the label width and printhead width that you are using.

• Ribbon must be wound with the coated side out.
• Ribbon should be at least as wide as the labels to protect the printhead from excessive 

wear.

110XiIIIPlus/R110Xi
200 dpi

110XiIIIPlus/R110Xi
300 dpi

110XiIIIPlus
600 dpi

Printhead resolution

203 dots/inch 
(8 dots/mm)

300 dots/inch 
(12 dots/mm)

600 dots/inch 
(24 dots/mm)

Ribbon width Minimum

 0.79 in. (20 mm)*

 0.79 in. (20 mm)

 0.79 in. (20 mm)

Ribbon width Maximum

 

4.33 in. (110 mm)

 

4.33 in. (110 mm)

 

3.40 in. (87 mm)

Standard length with 2:1 
label to ribbon ratio

984 ft (300 m)

984 ft (300 m)

984 ft (300 m)

Standard length with 3:1 
label to ribbon ratio

1476 ft (450 m)

1476 ft (450 m)

1476 ft (450 m)

Ribbon core inside 
diameter

1.0 in. (25.4 mm)

1.0 in. (25.4 mm)

1.0 in. (25.4 mm)

Maximum ribbon roll 
outside diameter

3.2 in. (81.3 mm)

3.2 in. (81.3 mm)

3.2 in. (81.3 mm)

*  For RFID labels, the minimum ribbon width is determined by the minimum label width for the transponder being used.