Zebra Technologies Corporation RFID-M2HF ユーザーズマニュアル
Specifications
Ribbon Specifications
Ribbon Specifications
166
13383L-002 Rev. A
XiIIIPlus/R110Xi/R170Xi User Guide
12/2/05
Ribbon Specifications
Refer to the following tables for ribbon specifications.
110XiIIIPlus and R110Xi
Note •
Match the ribbon to the label width and printhead width that you are using.
• Ribbon must be wound with the coated side out.
• Ribbon should be at least as wide as the labels to protect the printhead from excessive
• Ribbon should be at least as wide as the labels to protect the printhead from excessive
wear.
Ribbon Specifications
110XiIIIPlus/R110Xi
200 dpi
200 dpi
110XiIIIPlus/R110Xi
300 dpi
300 dpi
110XiIIIPlus
600 dpi
600 dpi
Printhead resolution
203 dots/inch
(8 dots/mm)
(8 dots/mm)
300 dots/inch
(12 dots/mm)
(12 dots/mm)
600 dots/inch
(24 dots/mm)
(24 dots/mm)
Ribbon width Minimum
0.79 in. (20 mm)*
0.79 in. (20 mm)
0.79 in. (20 mm)
Ribbon width Maximum
4.33 in. (110 mm)
4.33 in. (110 mm)
3.40 in. (87 mm)
Standard length with 2:1
label to ribbon ratio
label to ribbon ratio
984 ft (300 m)
984 ft (300 m)
984 ft (300 m)
Standard length with 3:1
label to ribbon ratio
label to ribbon ratio
1476 ft (450 m)
1476 ft (450 m)
1476 ft (450 m)
Ribbon core inside
diameter
diameter
1.0 in. (25.4 mm)
1.0 in. (25.4 mm)
1.0 in. (25.4 mm)
Maximum ribbon roll
outside diameter
outside diameter
3.2 in. (81.3 mm)
3.2 in. (81.3 mm)
3.2 in. (81.3 mm)
* For RFID labels, the minimum ribbon width is determined by the minimum label width for the transponder being used.