Zebra Technologies Corporation RFID-R110XI-03 Benutzerhandbuch

132

R110Xi/R170Xi User Guide

23063L-003 Rev. 2

12/17/04

Communications Problems

 identifies problems with communications, the possible causes, and the recommended 

solutions.

The communication 
parameters are incorrect.

Check the printer driver or software 
communications settings (if applicable).

If you are using serial communication, check 
the serial port setting in the front panel menu. 
See 

. 

Make sure you are using the correct 
communication cable. See 

 for the requirements.

Using the front panel controls, check the 
protocol setting. It should be set to 

NONE

. See 

.

If a driver is used, check the driver 
communication settings for your connection.

The host is set to EPP 
parallel communications.

Change the settings on the computer host to 
standard parallel communications. See 

.

The serial communication 
settings are incorrect.

Ensure that the flow control settings match.

Check the communication cable length. See 

requirements.

Check the printer driver or software 
communications settings (if applicable).

The prefix and delimiter 
characters set in the printer 
do not match the ones in the 
label format.

Verify the prefix and delimiter characters. See 

and

 

 for the 

requirements.

Incorrect data is being sent 
to the printer.

Ensure that ZPL is being used.

Check the communication settings on the 
computer. Ensure that they match the printer 
settings.