Zebra Technologies Corporation RFID-R4CXNG-01 Benutzerhandbuch

T/R

r G

Bluetooth ZBR4 Radio

The following section only applies when the Bluetooth ZBR4 module is installed in a P4T

series printer. This radio configuration has demonstrated compliance to FCC regulations.

P4T series printers with this configuration sold in North America will have the FCC ID:

I28-MD-ZBR4WA and the Industrie Canada ID: 3798B-ZBR4WA for this radio module on a

label on the back of the printer.

Caution • Exposure to Radio Frequency Radiation.

The radiated output power of this internal Bluetooth radio

is far below the FCC radio frequency exposure limits. The

internal Bluetooth radio operates within guidelines found

in radio frequency safety standards and recommendations.

Do not use the printer in an unauthorized manner.

Note • The following section only applies when the ZBR4

Bluetooth Radio is installed in a P4T Series printer. Unless

specified elsewhere in this manual, the antenna used for this

transmitter must not be co-located or must not operate in

conjunction with any other antenna.

European Regulatory Information for the ZBR4 Bluetooth Radio

This device is intended for use in all EU and EFTA member states.

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive
1999/5/EC. The following test methods have been applied in order to prove

presumption of compliance with the R&TTE Directive 1999/5/EC:

• EN 60950-1 Safety of Information Technology Equipment

• EN 300 328-2 Technical requirements for spread-spectrum radio
equipment

• EN 301 489-1/-17 EMC requirements for spread-spectrum radio equipment.

This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and

office use in all EU and EFTA member states.

WLAN Module Using 802.11b/g Radio

The following section only applies when the 802.11b/g WLAN module is installed in a P4T

series printer. Other than conditions specified elsewhere in this manual, only one of the

radio options can be installed in the printer at one time and the antenna used for these

transmitters must not be co-located or must not operate in conjunction with any other

antenna.

P4T Series printers for sale in North America will have the 802.11b/g radio FCC ID: 128-PLAN11BG or

FCC ID: I28MD-CXLAN11G, and the Industrie Canada ID: 3798B-PLAN11BG or Industrie Canada ID:

3798B-CXLAN11G printed on a label on the back of the unit.

Caution • The radiated output power of this internal 802.11b/g WLAN radio is far below

the FCC radio frequency exposure limits. The internal radio operates within guidelines

found in radio frequency safety standards and recommendations. Do not use the

printer in an unauthorized manner.

Caution • Use of a P4T printer with the radio module marked with FCC ID:

128-PLAN11BG or FCC ID: I28MD-CXLAN11G meets the FCC requirements for

radio frequency (RF) radiation exposure in the standard body worn configuration

with no minimum separation. In this configuration, which applies whether the

belt clip or shoulder strap is used, the face of the printer from which paper is

transported is facing away from the user’s body. The standard configuration

must always be used when the printer is body worn.

Industry Canada (IC) Warning

This device complies with Industry Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions:

1) This device may not cause interference.

2) This device must accept any interference, including interference that may cause un-

desired operation of the device.

European Regulatory Information for this Radio

BE CY CZ DK

FR DE GR

LU MT NL PL

SE GB

Note: -Member states in the EU with restrictive use for this device are
crossed out!

This device is also authorized for use in all EFTA member states (CH, IS, LI, NO)

Important Notice:

This device is a portable RF printer intended
for commercial and industrial use in all EU
and EFTA member states.

Important Notice:

This device is a portable RF printer
intended for commercial and industrial use
in all EU and EFTA member states except in
France where restrictive use applies

Radio Regulatory Information

Section Continues

Pri

nte

r P

tio

. 7

tin

g t

Pri

nte

r p

g. 2

dio R
eg

ula

ati

on p
g. 3

4T P
rin

. 3

ain

e p
g. 3

Tro

tin

. 3

ifi

tio

. 4

ice

s p

g. 4

x p
g. 5

T O
ve

. 5

trod

tio

n p
g. 4