Zebra Technologies Corporation RFID-R4CXNG-01 사용자 설명서
P
4
T/R
P
4
T
U
se
r G
u
id
e
30
Bluetooth ZBR4 Radio
The following section only applies when the Bluetooth ZBR4 module is installed in a P4T
series printer. This radio configuration has demonstrated compliance to FCC regulations.
P4T series printers with this configuration sold in North America will have the FCC ID:
I28-MD-ZBR4WA and the Industrie Canada ID: 3798B-ZBR4WA for this radio module on a
label on the back of the printer.
Caution • Exposure to Radio Frequency Radiation.
The radiated output power of this internal Bluetooth radio
is far below the FCC radio frequency exposure limits. The
internal Bluetooth radio operates within guidelines found
in radio frequency safety standards and recommendations.
Do not use the printer in an unauthorized manner.
Note • The following section only applies when the ZBR4
Bluetooth Radio is installed in a P4T Series printer. Unless
specified elsewhere in this manual, the antenna used for this
transmitter must not be co-located or must not operate in
conjunction with any other antenna.
European Regulatory Information for the ZBR4 Bluetooth Radio
This device is intended for use in all EU and EFTA member states.
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive
1999/5/EC. The following test methods have been applied in order to prove
1999/5/EC. The following test methods have been applied in order to prove
presumption of compliance with the R&TTE Directive 1999/5/EC:
• EN 60950-1 Safety of Information Technology Equipment
• EN 300 328-2 Technical requirements for spread-spectrum radio
equipment
equipment
• EN 301 489-1/-17 EMC requirements for spread-spectrum radio equipment.
This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and
office use in all EU and EFTA member states.
WLAN Module Using 802.11b/g Radio
The following section only applies when the 802.11b/g WLAN module is installed in a P4T
series printer. Other than conditions specified elsewhere in this manual, only one of the
radio options can be installed in the printer at one time and the antenna used for these
transmitters must not be co-located or must not operate in conjunction with any other
antenna.
P4T Series printers for sale in North America will have the 802.11b/g radio FCC ID: 128-PLAN11BG or
FCC ID: I28MD-CXLAN11G, and the Industrie Canada ID: 3798B-PLAN11BG or Industrie Canada ID:
3798B-CXLAN11G printed on a label on the back of the unit.
Caution • The radiated output power of this internal 802.11b/g WLAN radio is far below
the FCC radio frequency exposure limits. The internal radio operates within guidelines
found in radio frequency safety standards and recommendations. Do not use the
printer in an unauthorized manner.
Caution • Use of a P4T printer with the radio module marked with FCC ID:
128-PLAN11BG or FCC ID: I28MD-CXLAN11G meets the FCC requirements for
radio frequency (RF) radiation exposure in the standard body worn configuration
with no minimum separation. In this configuration, which applies whether the
belt clip or shoulder strap is used, the face of the printer from which paper is
transported is facing away from the user’s body. The standard configuration
must always be used when the printer is body worn.
Industry Canada (IC) Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
1) This device may not cause interference.
2) This device must accept any interference, including interference that may cause un-
desired operation of the device.
European Regulatory Information for this Radio
AT
BE CY CZ DK
EE
FI
FR DE GR
HU
IE
IT
LV
LT
LU MT NL PL
PT
SK
SI
ES
SE GB
Note: -Member states in the EU with restrictive use for this device are
crossed out!
crossed out!
This device is also authorized for use in all EFTA member states (CH, IS, LI, NO)
Important Notice:
This device is a portable RF printer intended
for commercial and industrial use in all EU
and EFTA member states.
for commercial and industrial use in all EU
and EFTA member states.
Important Notice:
This device is a portable RF printer
intended for commercial and industrial use
in all EU and EFTA member states except in
France where restrictive use applies
intended for commercial and industrial use
in all EU and EFTA member states except in
France where restrictive use applies
Radio Regulatory Information
Section Continues
Pri
nte
r P
re
pa
ra
tio
n
pg
. 7
Co
nn
ec
tin
g t
he
Pri
nte
r p
g. 2
6
Ra
dio R
eg
eg
ula
to
ry
In
fo
rm
ati
on p
g. 3
g. 3
0
RP
4T P
rin
rin
te
rs
pg
. 3
4
M
ain
te
na
nc
e p
g. 3
g. 3
5
Tro
ub
le
sh
oo
tin
g
pg
. 3
7
Sp
ec
ifi
ca
tio
ns
pg
. 4
2
Ap
pe
nd
ice
s p
g. 4
5
In
de
x p
g. 5
g. 5
1
P4
T O
ve
ve
rv
ie
w-
pg
. 5
M
an
ua
l
In
trod
uc
tio
n p
g. 4
g. 4