ZyXEL Communications Corporation NWA1121NI Benutzerhandbuch
NWA1121-NI User’s Guide
129
C
H A P T E R
1 2
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
problems are divided into the following categories.
•
•
•
12.1 Power, Hardware Connections, and LEDs
The NWA1121-NI does not turn on. None of the LEDs turn on.
1
Make sure you are using the power adaptor or cord included with the NWA1121-NI.
2
Make sure the power adaptor or cord is connected to the NWA1121-NI and plugged in to an
appropriate power source. Make sure the power source is turned on.
appropriate power source. Make sure the power source is turned on.
3
Disconnect and re-connect the power adaptor or cord to the NWA1121-NI.
4
If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See
.
2
Check the hardware connections. See the Quick Start Guide.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4
Disconnect and re-connect the power adaptor to the NWA1121-NI.
5
If the problem continues, contact the vendor.