Davis Instruments DWW6800 Benutzerhandbuch
10
• While the Gateway is searching for signals, the LED lights will flash.
• When the signals are acquired, the LEDs will stop flashing and stay on. After
• When the signals are acquired, the LEDs will stop flashing and stay on. After
several minutes, the solid LED lights will time out and go off.
If there is a connection error, the lights will flash quickly. Their behavior will
indicate the type of error.
indicate the type of error.
Note:
The LED lights can be reactivated by pressing and releasing the blue status LED on/
off button. After pressing the button, wait for up to 30 seconds for lights to come on.
Do not hold the button down.
off button. After pressing the button, wait for up to 30 seconds for lights to come on.
Do not hold the button down.
The Gateway will now begin to acquire the cell signal. As this is occurring, you
may see the lights go on an off or blink, but after about a minute, the lights will
begin to indicate the status of your connections. You will be able to use the lights
to verify connection or troubleshoot connection problems by watching the LED
lights.
begin to indicate the status of your connections. You will be able to use the lights
to verify connection or troubleshoot connection problems by watching the LED
lights.
The lights flash when Gateway is searching for a signal from the weather station
(upper LED) or a cell signal (lower LEDs). Once the signal is detected, all four cell
status lights will turn solid and stay on for a few minutes, indicating success. It can
take several minutes to acquire all signals.
status lights will turn solid and stay on for a few minutes, indicating success. It can
take several minutes to acquire all signals.
Add the Gateway
1. Make sure the Bluetooth function on your smartphone is on.
2. Open the app and tap “Add a Gateway.”
3. Bring the phone close to the Gateway or tap it gently on the Gateway.
4. Follow the prompts as the Gateway is located and connection is made between
2. Open the app and tap “Add a Gateway.”
3. Bring the phone close to the Gateway or tap it gently on the Gateway.
4. Follow the prompts as the Gateway is located and connection is made between
the Gateway and your account on WeatherLink.com.