MilDef Crete Inc. RT9 Benutzerhandbuch

 

 

  Cleaning                                                                                                 

 
ALWAYS turn OFF the power, unplug the power cord and remove the 
battery before cleaning. 
 
The exterior of the system and display may be wiped with a clean, soft, and 
lint-free cloth. If there is difficulty removing dirt, apply non-ammonia, 
non-alcohol based glass cleaner to the cloth and wipe.   
 
An air gun is recommended for cleaning water and dust. For salty water 
please clean with fresh water then blow-dry with an air gun. Be sure not to 
turn the computer up side down while there is water being applied. 
 

  Troubleshooting                                                                                 

 
Should the computer fail to function properly, the troubleshooting steps 
below may be followed. 
 
z

  Check AC/vehicle adapter, battery, and the power source. 

z

  Minimize the configuration, i.e. remove extra peripherals and devices. 

z

  Remove the modules one by one (HDD, CD-ROM, Battery, etc.).   

z

  Remove the software suspected. 

z

  Set BIOS fail-safe default. 

z

  Re-install operating system and application software.