Echelon Corporation 70101-R003 Benutzerhandbuch
32
Pole Mount Installation
Figure 14. Secure the ECN to the Pole Mounting Bracket
Connect the ECN to Power and the Network
You make the connections to power and to the communications network at the
bottom of the ECN. All Echelon supplied connectors are IP67 rated. Each
connector has a cap designed to maintain its long-term reliability. Figure 15 on
page 33 shows the bottom of a typical ECN, before installation.
You can connect the ECN to either low voltage, or with the CT option, medium
You can connect the ECN to either low voltage, or with the CT option, medium
voltage.
The exact configuration of the ECN bottom panel depends on the options that you
The exact configuration of the ECN bottom panel depends on the options that you
have installed in the ECN, but at a minimum, the bottom panel has a connection
for power. In the figure, the upper left connection is for power.
To make the power connection, remove the cap, insert the power cable, and twist
To make the power connection, remove the cap, insert the power cable, and twist
the cable ¼ turn to lock it in place.