Xircom EAG2919 Benutzerhandbuch

Eagle II GSM Radio Module Technical Manual Preliminary Draft: 08/31/00

31

Part Number: 07100017 version 00.04

© 2000 Xircom, Inc. All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc.

! 

After initializing the module with the proper SMS mode, select the proper service
center. The service center is the Public Land Mobile Network (PLMN) to which the
SME telephone number belongs. The following command selects the service center.

AT+CSCA="1917907004"

Service center initialization:
VoiceStream SMSC – NJ

OK

! 

The following command selects TEXT mode for SMS messages.

AT+CMGF=1

Set message format to TEXT mode

OK

Command is correct

! 

The following command sets the indicators for the message.

AT+CNMI=0,1,0,0,0

Set the new message indicators

AT+CNMI=<mode>,<mt>,<bm>,<ds>,<bfr>

" 

<mode>=0, Buffer unsolicited result codes

indication

" 

<mt>=1, SMS-DELIVERs are routed using

unsolicited code

" 

<bm>=0, no CBM indications are routed

to the TE

" 

 <ds>=0, no SMS-STATUS-REPORTs

" are 

routed

" 

<bfr>=0, TA buffer of unsolicited result

codes defined within this command is

flushed to the TE

OK

Successful command

! 

The following command saves the SMS settings. Once the SMS commands have
been saved, the initialization commands do not need to be sent again until they are
changed.

AT+CSAS

Save SMS settings

OK

Successful transmission

! 

After the Eagle II module has been initialized, the following commands and sample
responses provide the telephone number and the message to be transmitted.